Terabee SAS TeraRanger Multiflex 8 Sensor Kit : Data Sheet : Page 9

2Assembly

Please follow these 5 simple steps illustrating a tutorial on how to connect 8 sensors to the

TeraRanger Multiflex Hub.

Step 1. Sensor Positioning

Before connecting, make sure that the sensors are (1) positioned in the correct numeric

order and (2) facing the same direction. See Figure 5.

Figure 5. Sensor ascending numeric order

Each sensor is marked with a number (1 to 8), and a direction arrow for connection (Figure

5). Please double-check that the sensor units are placed in ascending order (1, 2, 3, 4, etc.)

and that they all face the same direction. In cases when less than 8 sensors are used,

always start with the sensor containing the lowest number and then connect subsequent

sensors in ascending numeric order.

TeraRanger Multiflex will not stream distance data if any of the sensor units are

connected in the wrong order or direction. See example in Figure 6.

Figure 6. Incorrect sensor order and direction



Terabee Website:

90RueHenriFabre Technicalsupport:

01630Saint-Genis-Pouilly Commercial:



www.teraranger.com

support@teraranger.com

teraranger@terabee.com



9