Data Sheet

Figure 15. Serial Port Setup

After, in the “Terminal Tab” (Figure 16) make sure the following fields are selected:

1. Terminal Mode: Raw Mode

2. Enter Key Emulation: CR+LF

Once done, click “OK” to apply changes.

Figure 16. Terminal Setup

In the toolbar, click the “Connect” button to start the data stream.



Terabee Website:

90RueHenriFabre Technicalsupport:

01630Saint-Genis-Pouilly Commercial:



www.teraranger.com

support@teraranger.com

teraranger@terabee.com

