Data Sheet

Copyright © Terabee 2017
Figure 13. H-Term Main Interface
To communicate with the terminal emulation software, you need to send a command in
hexadecimal via the “Type” box. First check the “Hex” checkbox and choose the “HEX”
Type. Figure X gives the example of the command which allows data to be shown in TEXT
mode when 8 sensor units are used. Please see Section 4.1 for basic commands!
3.2 MacOS
In MacOS we recommend to use a serial port terminal application such as CoolTerm
(http://freeware.the-meiers.org/). In the link, please scroll down to find the download file.
Extract the downloaded zip file to^ the folder of your choice, open it and double click on the
“CoolTerm.exe” document. The emulation software window should open. Now connect the
TeraRanger Multiflex Hub to your computer, and click the “Options” button in the toolbar.
Figure 14. CoolTerm Toolbar
In the “Serial Port” tab please select the corresponding USB port (Click “Re-scan” if the
USB is not detected). Select values for following fields (Baudrate, Data Bits, Parity, Stop
Bits) as shown in Figure 15.

Terabee Website:
90RueHenriFabre Technicalsupport:
01630Saint-Genis-Pouilly Commercial:

www.teraranger.com
[e-mail]
[e-mail]


14