Data Sheet

Copyright © Terabee 2017
3 Connecting the TeraRanger Multiflex Using a Computer      
withaSerialConsole
TeraRanger Multiflex can interact with any serial console using the following configuration,
both for USB, UART and I2C interfaces: 115200 bit/s, 8 data bits, no parity bit and one stop
bit.

3.1 Windows
In Windows you can use terminal emulation software of your choosing, however we
suggest you use HTerm (http://www.der-hammer.info/terminal/). Extract the downloaded
zip file to the folder of your choice, open it and double click on the “HTerm.exe” document.
Connect the TeraRanger Multiflex to your computer and select the corresponding USB port
(click “R” button to refresh the port list). Select values for the following fields: (1) Baudrate,
(2) Data Bits, (3) Parity, (4) Stop Bits. For easier readings, select the “CR+LF” option for
“Newline at” tab. See Figure 12 for visual instructions.
Figure 12. Connecting the USB Port
Once you have selected the USB port and required values, click on the “Connect” button.
The data will now appear in the “Received data” box (Figure 13).

Terabee Website:
90RueHenriFabre Technicalsupport:
01630Saint-Genis-Pouilly Commercial:

www.teraranger.com
[e-mail]
[e-mail]


13