Data Sheet

Copyright © Terabee 2017
Step 3. Connecting sensors to each other
Continue to connect all 8 sensor units together respecting their assigned numerical order
(Figure 9).
Figure 9. Correct connection of 8 sensor units
Step 4. Joining the strip of sensors to TeraRanger Multiflex Hub
Connect the strip of 8 sensors to the TeraRanger Multiflex Hub (Figure 10). The Hub also
contains an FFC connector, hence we ask to respect the guidelines on connecting as
described in Step 2.
Figure 10. Connecting sensor units to TeraRanger Multiflex Hub
IMPORTANT: Sensor 1 always needs to be directly connected to the TeraRanger Multiflex
Hub. The direction arrow must always point away from the TeraRanger Multiflex Hub. In
cases when sensor number 1 is not used, please connect sensor with the lowest numeric
value.

Terabee Website:
90RueHenriFabre Technicalsupport:
01630Saint-Genis-Pouilly Commercial:

www.teraranger.com
[e-mail]
[e-mail]


11