Data Sheet

Figure 5. Auto vs manual distance bounds
To set custom distance bounds, in the GUI select File > Auto Distance Bounds > Disable
(Figure 5). You should now be able to input minimum and maximum bounds in millimeters in
the fields on the bottom left side of the screen. Select “Adjust” to apply changes, and your
color map will adjust according to the set values.
Figure 6. Fast vs Close Range mode
On the main interface, select between Fast mode and Close Range mode (Figure 6). Use
“Fast” mode and achieve sampling rates as high as 130 frames per second, or select “Close
Range” mode for improved minimum range, starting from 10 centimeters. For more
information on the TeraRanger Evo 64px’s operating modes please refer to the TeraRanger
Evo 64px specification sheet.
By default, the 64 distance readings visualized on the depth map are interpolated. To disable
interpolation of pixels and display values in discrete mode, select File > Interpolate >
Disable (Figure 7).
Copyright © Terabee 2018
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
7/22