Data Sheet
4UART backboard use
4.1UART interface
The TeraRanger Evo 64px can be controlled through UART interface. It uses a single 9 pin
Hirose DF13 connector for interfacing to the host system. The mating connector is a Hirose
DF13-9S-1.25C with crimping contacts DF13-2630SCF (tin) or DF13-2630SCFA (gold).
Please consider the mechanical stability of the mated connectors and avoid any kind of
excess force on the connector (during installation and once integrated) and follow the
recommendations in the Hirose DF13 series datasheet (available here:
https://www.hirose.com/product/en/products/DF13) to ensure a reliable connection.
The table below provides an overview of the pin out of the DF13 connector:
Pin out and description (According to DF13 datasheet)
Pin
Designator
Description
1
Tx
UART transmit output. 3.3V logic
2
Rx
UART receive input. 3.3V logic
3
GND
Power supply and interface ground
4
rfu
RESERVED FOR FUTURE USE
5
rfu
RESERVED FOR FUTURE USE
6
rfu
RESERVED FOR FUTURE USE
7
5V
+5V supply input
8
GND
Power supply and interface ground
9
rfu
RESERVED FOR FUTURE USE
Copyright © Terabee 2018
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
11/22