User Manual



3.1.3



Firmware Upgrade

The current firmware version on your TeraRanger Evo can be found by selecting Help >

About



in the graphical user interface. It is possible to upgrade the firmware running on your

device if a new firmware version is made available on the Terabee website.

Please note the Upgrade Firmware feature is only supported on Windows 7, 8 and 10.

Please carefully follow the steps outlined below to avoid permanently disabling your device.

● Download the latest firmware from the Terabee website

● In the GUI Select File > Upgrade



Firmware

● You will be presented with a dialog window asking you to confirm your choice

Beyond this point, if you press ‘Yes’ it will not be possible to revert to the firmware

currently running on your TeraRanger Evo. Press ‘No’ to cancel and keep the current

firmware or ‘Yes’ to continue

● Read the instructions in the dialog window that opens

● Press ‘Select FW’ and select the new firmware file with Windows File Explorer

● Press ‘Upgrade’ and wait until the operation finishes

● Close the Upgrade dialog box

Terabee, 90 Rue Henri Fabre, 01630, St Genis-Pouilly, France

6/13