Instructions

4/17/2018 TeraRanger Evo Connection to Pixhawk Autopilots
https://www.terabee.com/connection-to-pixhawk-autopilots-teraranger-evo/ 9/16
  4. After making sure the sensor is connected to the Pixhawk I2C port, reboot the autopilot.
  5. To verify that the sensor is operational open an Analyze Widget (Widgets/Analyze). From the list on theleft
handside select; M1:DISTANCE_SENSOR.current_distance. The plot showing distance measurements should
indicate that the sensor is working correctly.