Instructions

4/17/2018 TeraRanger Evo Connection to Pixhawk Autopilots

https://www.terabee.com/connection-to-pixhawk-autopilots-teraranger-evo/ 7/16

4 Setup the onboard firmware

steps to follow:

4.1 PX4 – QGroundControl

Note:Please always use the latest QGroundControl version, available

from:https://docs.qgroundcontrol.com/en/getting_started/download_and_install.html

1. Launch QGroundControl software

2. Open Vehicle setup menu and go into the Firmware tab (unplug and replug autopilot if needed).

Select the latest stable release of PX4 Flight Stack. Press the Ok button to ﬂash the autopilot.Go to:

Parameters/Sensor Enable