Instructions
4/17/2018 TeraRanger Evo Connection to Pixhawk Autopilots
https://www.terabee.com/connection-to-pixhawk-autopilots-teraranger-evo/ 5/16
3.2 TeraRanger Evo wiring connection –
Pixhawk 1
For brevity we will refer to TeraRanger Evo as TR-Evo. To connect a TeraRanger Evo sensor module to
Pixhawk please make sure you have aTeraRanger EvoI2C version,composed of:
1. TR-Evo sensor
2. TR-I2C/UART backboard
3. DF13 9P to open-ended cable
To connect the sensor to the Pixhawk, please use the open-ended cable and make your connection as
shown below: