Instructions

4/17/2018 TeraRanger Evo Connection to Pixhawk Autopilots

https://www.terabee.com/connection-to-pixhawk-autopilots-teraranger-evo/ 10/16

4.2 ArduCopter – QGroundControl

1. Go to the Firmware tab on QGroundControl (reconnect autopilot in order to ﬂash a new ﬁrmware).

Select ArduPilot Flight Stack. In the dropdown menu select MultiRotor – APM:Copter. Check Advanced

settings and select Developer Build (master)(Warning: This is test ﬁrmware. Fly at your own risk!).

Press OK to ﬂash the updated ﬁrmware.