Data Sheet



3.1.2



Basic Operation

Make sure your TeraRanger Evo is connected to a USB port on your computer. In the GUI

select File > Connect. You should immediately see a distance reading in millimetres and the

status should change to ‘Connected’.



3.1.3



Firmware Upgrade

The current firmware version on your TeraRanger Evo can be found by selecting Help >

About



in the graphical user interface. It is possible to upgrade the firmware running on your

device if a new firmware version is made available on the Terabee website.

Please note the Upgrade Firmware feature is only supported on Windows 7, 8 and 10.

Please carefully follow the steps outlined below to avoid permanently disabling your device.

● Install the latest version of the TeraRanger Evo GUI on your computer

● Download the latest firmware file from the Terabee website

● In the GUI Select File > Connect



and then File > Upgrade



Firmware

Terabee, 90 Rue Henri Fabre, 01630, St Genis-Pouilly, France

6/14