Data Sheet

2.2Sensor handling during system assembly

During assembly and integration, please observe all common ESD precautions. All optical

surfaces (sensor front) should be kept clean and free from contact with chemicals.

3USB backboard use

The USB backboard comes with a standard Micro-USB connector.

3.1Graphical User Interface (version 1.0.3)

A free Graphical User Interface (GUI) is available, providing an easy way to visualize the

data from your TeraRanger Evo. This is useful for demonstration, testing purposes and

checking some of the basic parameters of the sensor. It also provides a way to easily

upgrade the firmware running on the device.

The GUI is available for download here: GUI Download. (See “Download” section of the

TeraRanger Evo product page). Please ensure you are using GUI version 1.0.3 or later.

If you need to identify which TeraRanger Evo sensor is currently connected, in the GUI

select, Help > About



3.1.1



Prerequisites

For usage on Windows 7 and Windows 8, please download the Virtual COM Port driver from

http://www.st.com/en/development-tools/stsw-stm32102.html and follow the ”ReadMe file”

instructions given by the installer. After successful installation, unplug the interface for a

few seconds, and plug it back in. The virtual COM port should now be available on your PC.

Users of Windows 10 do not need to download this driver as the built in Windows driver is

recommended.

Terabee, 90 Rue Henri Fabre, 01630, St Genis-Pouilly, France

5/14