Data Sheet

When choosing a place for mounting, please consider the following recommendations:

● Choose a place which is in accordance with the optical constraints listed below

● Mounting close to sources of heat or strong electromagnetic fields can decrease the

sensing performance

● Do not mount anything directly in front of the sensor or in a cone of approximately

+/-15° around the central optical axis of the sensor

● Within the first meter from the sensor, avoid objects with high surface reflectivity in a

cone of approximately +/-45° around the central optical axis of the sensor

● It is better to avoid having other sources of Continuous Wave or modulated IR light

close to the sensor

● Please consider that dust, dirt and condensation can affect the sensor performance

● It is not advised to add an additional cover in front of the sensor

● Drone rotor blades, or other environments with flickering (‘chopped’) ambient light in

the field of view can affect sensors’ readings

2.1Mechanical design

Terabee, 90 Rue Henri Fabre, 01630, St Genis-Pouilly, France

4/14