Data Sheet
1Introduction
The purpose of this document is to give guidelines for use and integration of the following
TeraRanger Evo distance sensors:
1. TeraRanger Evo 60m
2. TeraRanger Evo 600Hz
3. TeraRanger Evo 3m
with (a) UART/I2C backboard, and/or (b) USB backboard using these standard
communication interfaces. Please consult the following table for visual differences between
TeraRanger Evo sensors.
Product
Visualization
Hardware
TeraRanger Evo 60m
Black optical sensor module
TeraRanger Evo 600Hz
A yellow sticker is applied on the
sensor to differentiate from Evo
60m sensor.
TeraRanger Evo 3m
Sensor’s lens surface is flat, unlike
Evo 60m or Evo 600Hz.
2Mechanical integration
The mechanical design of the main sensor module (black) allows easy assembly to its
backboard (yellow) using a simple ‘clip-in’ technique. (When you clip the two together,
ensure there is no visible gap between the black and yellow parts.) The yellow backboard
has two mounting holes for final installation.
Copyright © Terabee 2018
Terabee, 90 Rue Henri Fabre, 01630, St Genis-Pouilly, France
3/14