Data Sheet

Copyright © Terabee 2018
1Introduction
The purpose of this document is to give guidelines for use and integration of the TeraRanger
Tower Evo using USB and UART communication interfaces.
2Mechanical Integration
2.1Mechanical Design
Figure 1. TeraRanger Tower Evo external dimensions
TeraRanger Tower Evo external dimensions are illustrated in Figure 1. The frame provides
four mounting holes on the bottom side, all designed for M3 screws. The straight distance
between mounting holes is 49.8mm.
When choosing a place for mounting, please consider the following recommendations:
● Choose a place which is in accordance with the optical constraints listed below
● Mounting close to sources of heat or strong electromagnetic fields can decrease the
sensing performance

Terabee Website:
90 Rue Henri Fabre Technical support:
01630, Saint-Genis-Pouilly Commercial:

www.teraranger.com
[e-mail]
[e-mail]
3/27