Data Sheet

Copyright © Terabee 2018
Figure 4. Distance data stream using H-Term
To communicate with the distance sensors connected to Tower Evo via the terminal
emulation software, you need to send a command in hexadecimal via the “Type” box. For
this, select the “HEX” Type as illustrated in the figure above. Figure 4 shows an example of
the command which allows data to be shown in TEXT mode. All commands are detailed in
section 5.
3.3LEDs
In total, four LEDs are mounted on TeraRanger Hub Evo to give visual feedback on the
sensor performance. The following table lists the functionality of each LED.
LED color
Description
Hub Evo Visual
PWR
(orange)
LED continuously on whenever
connected to a power supply.

Terabee Website:
90 Rue Henri Fabre Technical support:
01630, Saint-Genis-Pouilly Commercial:

www.teraranger.com
[e-mail]
[e-mail]
10/27