About This Manual An asterisk) next to an option Indicates the default setting Some command can be set by directly scanning the corresponding quick setting bar code. The steps for setting more functions are as follows: Note: If the next setting command Is not scanned within 20 seconds, the setting mood wll be automatically exited In order to use the bar code scanner correctly, please read the manual carefully and do not scan the setting bar code arbitrarily.
CONTENTS Product Specification Regular Settings Restore to Default Setting Version Number Decoding Buzzer Sound Setting. Gearing Retry/ Line Break Seth...
5. Keyboard Language Type [NAG qin { EXOPLANET [An | JEJUNUM Emm Spanish &. Symbology Setting Haas! TE AA Al symbology On Al symbology OF 2D cad is nat on by default It needs to be muted on additionally.
Read and transmit all bar codes with of without ‘check character Start End character Output On ISBN 128 On “ISBN 128 OF io 32 OFF | cohesion | depressor | Check character validate Check character valuate and transmit but riot transmit Check On, read and transmit all bar codes with or without check character
IA ll Ili 1 IAL Microscopic MATURER Straight 2 of 5 Industrial On “Straight 2 of 5 Industrial Jill *UPC-A UPC-A Hack digit output OFF lil I | Ll HII 1 2 digit addenda On *2 digit addenda Off 08
UNCARING | FIO 5 digit addenda On *5 digit addenda Off 7.Add Prefigure Process of adding prof’ suffice 1). Scan *Add prefix” or “Add suffice’ bar code NWT Tn ‘Add Prefix 2). Determine the symbology to which add the prefix suffix, and define 2-digit hexadecimal number from the ASCII table For example, for Code 11, the bar coda type Is 1", and Hex ID Is 68" Scan 2-digit hex ID in the Appendix table, or scan 99 for ail symbology. 3).
Step 3: Scan “8”, “A” bar codes from appendix table In this manual Sta 4: Determining tha hexadecimal value of carriage rectum suffix farm the ASC conversion table: 0D.
Cara ter DEL Hex Cara “ler us Hex 24 1" Cara ter suB Hex Cara lar NAK | 3a SYN | 3p CAN | 3d SP Hex
