User's Manual
Table Of Contents
Manual KeyReader Plus
Manual
KeyReader Plus
TeraTron GmbH
Page 8 of 12
Document Version 1.0
Date: 19.07.2016
Autor: Frank Bajahr
Manual_KeyReaderPlus.doc
Picture 4: Completion
Your Personal computer is prepared to work with the KeyReader Plus now.
4 Configuration of KeyReader Plus
Connect the KeyReader Plus to an USB-Port of your PC. In case the KeyReader was off it will now
automatically turn on and boot up. During the boot process the „Key” LED is flashing blue. The “Bat-
tery” LED is indicating the charge condition of the battery. If it is green no charging takes place. If yel-
low, charging is in grogress.
To configure the KeyReader open a Browser on your PC. E.g. Internet Explorer.
Connect to the KeyReader by typing the following address in your browser:
http://192.168.17.17
You should now see the welcome screen of KeyReader Plus: