Operating Manual

Desktop KeyReader Plus
Operating Manual
Operating Manual
Desktop KeyReader Plus
©TeraTron GmbH
Page 7 of 12
Document Version 1.0
Date: February 25, 2021
Author: Marcel Mörchen
DesktopKeyReaderPlus_EN.docx
5. Operating Desktop KeyReader Plus
5.1. Reading the Vehicle Key
When the status LED is on, you are free to place a key on the Desktop KeyReader Plus tray. The entire
key must fit within the tray and must be positioned flat. The direction the key is pointing is irrelevant
(see images below).
Do not move the key while it is being read.
Since Desktop KeyReader Plus is constantly scanning for different key types, it may take a while for
the reading process to start. A confirmation signal sounds once a key is recognized.
A brief acoustic signal indicates the beginning of the reading process, and the key LED starts flashing
green. Avoid moving the key during the reading process. When the key data has been uploaded, a