Operation Manual

TENVIS Technology Co., Ltd.

Set up Wi-Fi by WPS button

What is WPS?

1. Connect the power cable and wait for the camera to initialize

itself. Please make sure the camera and the router are within

2 meters when you are setting Wi-Fi bu WPS button.

2. Press the WPS button on the back of the camera for about 3

seconds, then the front green light will flicker, then the camera

will be in WPS mode.

Wi-Fi Protected Setup (WPS) is a standard for easy and secure

wireless network set up and connections. WPS can automatically set

up a random network name (SSID) and strong WPA wireless security

for wireless routers, access points, computers, adapters, Wi-Fi phones,

and other electronic devices. If you want to set up camera’s Wi-Fi by

WPS, please make sure your router support WPS function.

Set up Wi-Fi by WPS button

TENVIS