Operation Manual

3. When the Wi-Fi is successfully configured, you can now disconnect

the network cable from your camera and start using your camera as a

wireless device.

*Notice: Please wait for 30 sec to 1 minfor camera to switch to Wi-Fi

mode;

Alarm setting

1. Power off the camera, insert a micro SD card if you want to record

to micro SD card (purchase separately, not sold with this product).

Power on the camera and wait for it to reboot.

2. Tap on Record in settings and select the mode to record to micro SD card. Switch between

Full time for continuous recording, or Alarm for recording while motion is detected.

*Notice: When card is full the camera will automatically overwrite history

recorded files.

TENVIS Technology Co., Ltd.