Operation Manual

5
Local IP
Your computer’s IP address
Subnet Mask
Your computer’s subnet Mask
Gateway / Router
Your computer’s Gateway/Router’s IP address
S/N / UID
Camera’s serial number or P2P
Name
Camera’s display name which is set to distinguish it from other
devices on your network
IP Address
Camera’s local network IP address, which is used to view the
camera on the same local network. Specify a unique IP address for
your network camera.
Netmask / Subnet
Mask
Specify the mask for the subnet the network camera is located on
Default Gateway /
Router
Specify the IP address of the default gateway (router) used for
connecting devices attached to different networks and network
segments
Service Port / Internet
Port
Camera’s communications port which is set to send video and
audio data, the default port is 8001
MAC / MAC address
Camera’s Ethernet address
Internet URL
Camera’s remote view URL. You can click Open to view the camera
from Internet after you finish the Internet View configuration.
DNS1 / DNS2
DNS automatically converts the names we type in our Web browser
address bar to the IP addresses of Web servers hosting those sites.
You can ask your ISP or copy your PC’s configuration.
Double click the IP shown in the search tool, the search tool will open your default web
browser and redirect to the camera’s URL.
Usability of camera’s functions depends on web browsers. Currently only Internet Explorer
supports full functionalities. Cameras in non-IE web browser do not support 2-way audio,
record to PC, zoom and management of video recordings. Thus we recommend viewing the
camera in Internet Explorer.