Operation Manual

26
Shared Name
Your NAS’ Share Name provided by your NAS service/device
provider. It is for SMB/CIFS Protocol only.
Server Directory
Your NAS’ Server Directory provided by your NAS service/device
provider. It is for NFS Protocol only.
Sub-Directory
It is for FTP Protocol only, the name of sub- directory if you want
to record to sub- directory. If you want to record to root folder,
leave it blank will be OK.
Save snapshots to
network storage
If you not only want to record to NAS, but also want to save
snapshots to your NAS, you can enable this.
Notice: Once enabled, no E-mail alert will be sent any more as the
snapshots will all go into your NAS.
Strategy
Delayed
Save videos to camera built-in storage or TF card first and then
upload to network server. Please enable this option with low
bandwidth. Size of file is limited to 3MB if TF card is not inserted.
Suitable for short time record (for example, Alarm triggered video
recording)
Realtime
Real-time upload should require enough bandwidth; lack of
adequate bandwidth may cause frame loss. Suitable for long-time
video recording.
Notice:
1. Remote playback is not supported if FTP is selected
2. The Camera uses its S/N to create a sub-directory on the server, and save all its files
there. This allows several IP Cameras to use the same destination
3. All TF card record file will upload to NAS if record to NAS is enabled. If a TF card is
present, it is used as a backup storage whenever the network connection fails. When the
connection is restored, files on TF card will be uploaded to the server
Remote View & Mobile Phone View
Please check Quick Start Guide for remote view and mobile phone view.
If you want to view the camera by web browser remotely, please set up DDNS and port
forwarding.
For more information of port forwarding, please understand we cannot provide a common
solution as there are too many router brands. Please Google your router’s brand of port
forwarding or visit our website for help. Thank you.
http://www.tenvis.com