Operation Manual

19
Enable e-mail alert
Enable e-mail alert
SMTP Server
Sending emails provider ‘s SMTP server address
Port (default 25)
Service port of SMTP server. For Gmail, it is 587. For other
email service providers, please search on the Internet.
Account
Email address for sending the alert email
Password
Sender email’s login password
Sender's email address
Email address for sending the alert email
Recipient's email address
E-mail address for receiving the alert email
E-mail Alert Configuration
Enable e-mail alert: Enable it
SMTP Server: The SMTP (short for Simple Mail Transfer Protocol) works like a post assistant,
handling the sending of emails from the camera to an email server. SMTP Server receives
outgoing mail messages from users to the mail recipients they are intended for.
If your sender email provider is a public server, you can search the IP address of the email
provider’s SMTP server or DDNS from Google.
If your sender email provider is a private one, you can consult with the email provider’s
customer service.
Port: Service port of SMTP server which you can get with the above procedure
Account is your own email account that you use to login to the SMTP server. Sometimes this
is also the email address but in most cases it is a separate account id.
Password: The password you use to login to the SMTP server which is also the sender email
password.
Sender's email address: The sender’s email address must correspond to the account, port
and SMTP-server settings above.
Recipient's email address is the email account that accepts the email alerts and we suggest
that you make it a different email from the sender email.
Then click OK and Send a test e-mail. Once it says OK that means the camera has set up
e-mail settings.