Operation Manual

16
Network
IP and Port
The Camera’s Basic Network Settings
Address Type
Enable or disable obtaining IP address from DHCP server automatically. If
it is enabled, IP address and other items cannot be changed manually.
IP
Camera’s local network IP address, which is used to view the camera in
the same local area network.
Specify a unique IP address for your network camera.
NetMask
Specify the mask for the subnet the network camera is located on
Default Gateway
Specify the IP address of the default gateway (router) used for connecting
devices attached to different networks and network segments
MAC
The camera’s wired MAC address.
DNS1 /DNS2
DNS (Domain Name Service) provides the translation of host names to IP
addresses of your network
Port
Camera’s communications port which is set to send video and audio data
If you want to access the cam from Internet (outside your local network) or via mobile
devices (iPhone, Smartphone, Touchpad, etc) and your router does not support fixed
IP-addresses within the DHCP-range then you should get help by an experience
IT-specialist to setup your router to be able to access the cam from Internet.
If your cam shall be used within Wi-Fi mode, you should setup the wireless options
and restart the camera and come back to this menu to finalize the IP-address and
Port-settings.
The reason is that the cam gets a new MAC-address during Wi-Fi-mode and the
IP-address provided by the router (when using DHCP) changes correspondingly.