Operation Manual

15
Snapshot Interval
The interval of E-mail alert snapshots
Automatically Reboot
The camera reboots itself at the required time
RTSP doesn't require password
Allow access to RTSP stream without authentication (not
recommended).
Onvif doesn't require password
Allows access to ONVIF protocol without authentication
(not recommended)
Disable P2P
Disable P2P function of Quick Start Guide
Update
This is an advanced setting (only works using the Internet Explorer).
Update the device to the latest firmware version which can be found on our official website.
http://www.tenvis.com/download
Notice:
1. Please choose proper update package for your camera model.
2. Use an Ethernet cable NOT WI-FI to connect to your camera during the update process.
3. Make sure that the camera is not unplugged during the update process.
4. The whole process may take about 2-3 minutes. Please wait until camera reboots.
5. Please update only with the help of a professional in case of problems while updating.
6. TENVIS is not responsible for improper update attempts that lead to camera crash.
7. It only works in Internet Explorer.
Reset Settings
This is an advanced setting.
You can click reset button to reset the camera to default settings. Please do so only if you
want to delete all the settings you have done in the camera.