-109_InstructionManual.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . 1 Operating Instructions . . . . . . . . . . . . . . . 2 2 Quick start 2 Pairing the sp-109 with your Bluetooth A2DP enabled Mobile Phone, iPod touch®, iPhone™, or mp3 player 2 Adjusting the Volume 2 answering and making phone calls when streaming music 3 Connect Using a Cable Troubleshooting . . . . . . . . . . . . . . . . . . . . 4 FAQ . . . . . . . . . . . . . . . .
Welcome Thank you for your purchase of the Tenqa™ SP-109 Bluetooth® Wireless Speaker. You are on your way to living a life free of wires. But first, please read this user’s guide carefully for important information concerning operation, performance and safety. If you are unfamiliar with some of the terms in this user’s guide, please consult the glossary located in this manual.
2 Operating Instructions Quick start 1. Insert the power adapter plug into the power socket (DC IN) on the side of the SP-109 and plug it into a power outlet. 2. Turn the power switch on the side of the SP-109 to the ‘ON’ position. 3. After turning the SP-109 on, the blue LED indicator should flash intermittently indicating the speaker is in “pairing mode.” 4. The speaker is now ready to connect to your Bluetooth® enabled device.
3 On/Off Switch Volume Dial Line-in Jack Power Adapter Bluetooth Indicator Light music will resume playing where it left off. Making a phone call while streaming music is simple as well. Simply dial and place the call as normal and the music will automatically pause while the call is in progress. Upon completion of the call, your music will resume playing where it left off. Connect Using a Cable Your SP-109 Wireless Speaker is also capable of connecting to a device with a 3.5mm audio connector.
4 Troubleshooting Q. Why can’t I hear sound from the SP-109? A. Check the volume level on both the SP-109 and your Bluetooth enabled music player. Also ensure that there are no ‘barriers’ between the SP-109 and your paired Bluetooth® device such as walls, people or furniture as this may prevent the speaker and device from pairing successfully. If you still can not hear sound, reset the device that you are trying to pair the speaker with.
5 Safety Information Please read all safety information and operating instructions before using the SP-109 to avoid injury. Bluetooth Communication Bluetooth wireless technology operates within a range of about 10 m (33 feet). Install the transceiver and any connected Bluetooth device as closely to each other as possible. The following conditions may have a negative effect on the Bluetooth connection: • certain obstacles (people, metal, walls, etc.) • an electromagnetic environment • A device with a 2.
6 WARNING Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. Handling the SP-109 Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into the SP-109. Use common sense when operating this and all electronic devices. Avoid Water and Wet Locations Do not use the SP-109 in the rain, or near sinks, bathtubs or other wet locations.
7 Avoiding Hearing Damage Permanent hearing loss may occur if the SP-109 is used at high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muted speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected.
8 consult local laws to determine if this device is allowed to be operated on board an aircraft. Vehicles: RF signals may conflict with installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. Electronic Devices: Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from the SP-109.
9 Keeping the Outside of the SP-109 Clean To clean the SP-109 unplug all cables and turn off the SP-109 (see inside this user manual for instructions on turning off the SP-109.) Then use a soft, slightly damp, lint-free cloth. Avoid getting moisture in openings. Do not use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean the SP-109. Allow adequate time for the SP-109 to dry completely before using again.
10 Glossary A2DP: Advanced Audio Distribution Profile This converts normal audio files, such as mp3 files in a mobile phone or computer, into streaming stereo music. Many new mobile phones are being made with this feature built-in. AVRCP: Audio/Video Remote Control Profile This feature allows the user to control the output of one device from a remote device.
11 Limited Warranty Tenqa 1 YEAR Limited Warranty FOR CONSUMERS, WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. THIS WARRANTY DOES NOT EXCLUDE, LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING OUT OF NONCONFORMITY WITH A SALES CONTRACT.
12 TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AS PERMITTED BY APPLICABLE LAW, TENQA SPECIFICALLY DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS.
Conformity Declaration FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Copyright © 2009 Pitts Pacific, LLC. All rights reserved. Tenqa® and the Tenqa logo are registered trademarks of Pitts Pacific, LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Pitts Pacific, LLC is under license. iPod®, iPod touch® and iPhone™ are trademarks of Apple Inc., registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
