Manualshelf

Instructions / Assembly

ManualsBrandsTENONER ManualsDoors & Windows32 in. x 80 in. MDF Wood, Finished, White, 5-Panel, Frosted Glass, Pantry Door Panels, Single Door Slab Sliding Door
123
1
2
3
4
FOUR
Align stile A2‘s holes with wood plugs and make sure all the tempered
glass is align with stile’s groove.
In the end, fasten A2 with all B1 B2 and B4 with 12 carriage bolts . After
making sure all the bolts are tightened, place the included plastic trim
covers on top of the bolts. Then your door is ready to hang.
THREE
Gently slide five tempered glass into A1’s groove following the instruction.
Then insert 2 wood plugs into each left side of B3 slat and 1 wood plug into each
left side of B2 slat.
TWO
Using two wood plugs to connect each B3 with stile A1. Make sure that
each slats of B1,B2 and B3 is tightly connected with A1.
ONE
Attach B1 (top slat) and B4(lower slat)to stile A1 by inserting the tongues
into the groove of A1 and fastening with four carriage bolts.
Using one wood plug and one carriage bolt to connect each B2 with stile A1.
wood plug
carriage bolt
wood plug
wood plug