Instructions / Assembly
A1
A2
B1
B2
B3
B4
D
E
F
1
1
1
2
2
1
12
12
1
Side Stile Right
Side Stile Left
Top Rail
Rail with 2 different holes
Rail with 2 same holes
Bottom Rail
Carriage Bolts
Plastic Trim
Allen Key
Description QTY
TEMPERED GLASS
TEMPERED GLASS
TEMPERED GLASS
TEMPERED GLASS
TEMPERED GLASS
DOOR PANEL ASSEMBLY INSTRUCTIONS
For best results, carefully follow the instructions in this guide.Glue and other adhesives are not required, and we do not recommend their use
during the assembly process.
First, remove all parts from the box and place them on a flat, open surface. Then, using the guide drawings at the bottom of this page, identify
each slat. Next, follow the drawing on the left to place each part as shown.
Make sure to pay special attention to the direction of the tongues and grooves on each piece. A1 and A2‘s groove are facing inside. B4 is
wider than B1,B2 and B3.
F
D
E
Carriage Bolt Wood Plug