Instructions / Assembly

DOOR PANEL

ASSEMBLY INSTRUCTIONS

PAGE 1
DOOR PANEL ASSEMBLY INSTRUCTIONS
PAGE 2
DOOR PANEL ASSEMBLY INSTRUCTIONS For best results, carefully follow the instructions in this guide.Glue and other adhesives are not required, and we do not recommend their use during the assembly process. First, remove all parts from the box and place them on a flat, open surface. Then, using the guide drawings at the bottom of this page, identify each slat. Next, follow the drawing on the left to place each part as shown.
PAGE 3
1 2 3 4 ONE Attach B1 (top slat) and B4(lower slat)to stile A1 by inserting the tongues into the groove of A1 and fastening with four carriage bolts. Using one wood plug and one carriage bolt to connect each B2 with stile A1. THREE Gently slide five tempered glass into A1’s groove following the instruction. Then insert 2 wood plugs into each left side of B3 slat and 1 wood plug into each left side of B2 slat.