User Guide

ManualsBrandsTENLOG Manuals3D PrintersIndependent Dual Extruder 3D Printer,300 Degree high Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS 8.6''x8.6''x9.8''

TENLOG Hands 2

DMP 3D Printer Manual

Shenzhen Tenlog 3D Technology Co., Ltd.

This manual is for reference only.

The structure and parts list of the Tenlog DMP 3D printer are subject to the actual product in the carton, and subject to change without notice.

AliExpress Amazon

Facebook Group

Offical website

Summary of content (6 pages)

PAGE 1
TENLOG Hands 2 DMP 3D Printer Manual Offical website Facebook Group AliExpress Amazon Shenzhen Tenlog 3D Technology Co., Ltd. This manual is for reference only. The structure and parts list of the Tenlog DMP 3D printer are subject to the actual product in the carton, and subject to change without notice.
PAGE 2
Parts List 1 2 3 Printer Host Z/X Gantry Assembly Dual Extruder & Nozzle Kits 5 4 Box 1 Box 2 13 M5 Spring Washer 5x 4mm 6 33 32 31 12 3mm 2.5mm 2mm 1.5mm 7 8 9 10 Allen Wrench 14 11 M5*25 Screw 5x M3*16 Screw 9x 16 Black Cable Tie 17 18 Test Filament 19 Test Filament 20 M4 T-nut 5x 15 M4*6 Screw 5x 21 22 Filament Holder 2x 23 24 25 19mm 10mm 8mm 15 Pins VGA Cable 2x 26 27 Filament Runout Sensor 2x 29 28 6mm Power Cable 1.5m USB Cable 30 0.
PAGE 3
Safety Alert 1 How to Assemble Minors are not allowed to use alone 2 Do not plug or unplug 1. under power NO HOT PLUG Assemble Z/X Gantry Assembly to the Printer Host 2 2 6 12 11 1 3 Double check voltage before first use 100-120 4 Do not touch hot nozzle 2. and hot bed Assemble Dual Extruder & Nozzle Kits 8 200-240 VOLTAGE SWITCH 3 5 A grounded wire is required 6 Do not touch any moving 3.
PAGE 4
. Wiring 18 17 18 X2 X1 19 17 17 Z2 5.
PAGE 5
How to Use Touch Screen Click on Tool button, you can get: 0/23 0/23 Semi-automatic Leveling Preheat PLA ABS Filaments Reload Printing from any Height etc. 0/23 X: 0.0 Y: 0.0 Tools Z: 0.
PAGE 6
Cura Interface Overview How to Use 1 1 How to Level 2 3 4 5 6 7 Scan Code to Watch 13 2 How to Set Nozzle Offset 8 12 11 3 How to Use 10 1 2 Open file. Opens a 3D file. 3 4 Configuration panel. Contains the material and print core setup. 9 Printer selection panel. Displays the selected printer. Stages. The prepare. Preview and monitor stage. Each stage is arranged to efficiently go through each 3D printing step. 5 Print settings panel. Contains all slice strategy parameters.