User Manual

Computer
．．．．．．．．
or
．．
Laptop
．．．．．．
Live
．．．．
Streaming
．．．．．．．．．
Settings
．．．．．．．．
：
．
① After the connection is correct, find the small speaker LOGO in the lower right
corner of the screen, right-click---select the playback device and the recording
device, if not, you can select the sound; Set both the speaker on the playback
page and the microphone on the recording page to: MV-AP82X
．．．．．．．．
or
．．
Tenlamp
．．．．．．．
KB11
．．．．
SoundCard
．．．．．．．．．
. After setting, click Apply to confirm.
② The software used by the computer also needs to be set, such as
accompaniment software and live stream software. In the software-"Settings", set
the audio input and output of "sound card", "audio output", "microphone", etc. to:
MV-AP82X
．．．．．．．．
or Tenlamp
．．．．．．．
KB11
．．．．
SoundCard,
．．．．．．．．．．
click Apply and confirm.
NOTE:
①
．
The
．．．
Loopback
．．．．．．．．
function(Short
．．．．．．．．．．．．．．
press
．．．．．
the
．．．
Putinside
．．．．．．．．．
button)
．．．．．．．
must
．．．．
be
．．
turned
．．．．．．
on,
．．．
when
．．．．
using
．．．．．
computer
．．．．．．．．
or
．．
laptop
．．．．．．
live
．．．．
streaming
．．．．．．．．．
or
．．
playing
．．．．．．．
accompaniment
．．．．．．．．．．．．．
music.
．．．．．．
②
．
For
．．．
better
．．．．．．
sound
．．．．．
quality,
．．．．．．．．
please
．．．．．．
do
．．
not
．．．
use
．．．
while
．．．．．
charging.
．．．．．．．．．
Common troubleshooting
Question 1: The device does not work or suddenly becomes silent.
Answer: The battery is dead, connect to USB to charge and use it.
Question 2: There is a lot of noise during the live broadcast.
Answer: A. Check whether the headset is inserted in place. Reconnect the headset;
B. Whether the earphone is inserted into the corresponding identification
position;
C. Appropriately reduce the microphone volume;
D. Check whether the battery is close to a dead state, please charge it in time;
E. If the PC live broadcasts and some laptops have interfering sound cards, try to
unplug the computer charge cable.
Question 3: The microphone is silent.
Answer: A. Check the insertion position of the microphone to ensure that the opponent
is identified;
B. Turn the microphone sound to the minimum, please monitor and gradually
increase the microphone volume.
Question 4: The live broadcast is silent or low.
Answer: A. Check if the live audio cable is connected to the corresponding live jack;
B. Check whether the mobile phone is inserted in place;
C. Try to see if you can live broadcast again after recording on your phone.
Question 5: The other party cannot hear the sound during the PC live broadcast, and it
has no effect.
Answer: A. Check whether the USB live cable can find the charging port, please use the
sound card configuration cable correctly;
B. Check whether the recording volume is adjusted to the maximum
Question 6: The sound is abnormal.
Answer: A. This sound card has a variety of voice-changing effects, please switch the
sound effect to a suitable original sound;
B.The earphone is incorrectly inserted in the earphone position, please
unplug it and insert it to the earphone mark position.
Product Name: Professional Live Sound Card
Model: KB11
Brand: tenlamp
Executive Standard: Q/SZD 009-2018
TEL: [phone]
URL: www.shizhandeng.com
Brand Owner: Shenzhen Shizhandeng Trading Co., Ltd.
Address: Room 601, Block C, 310 Wuhe Avenue, Luhu
Community,Guanhu Street, Longhua District, Shenzhen
Manufacturer: Shenzhen Shizhandeng Technology Co., Ltd.
Address: Room 602, Block C, 310 Wuhe Avenue, Luhu Community,
Guanhu Street, Longhua District, Shenzhen