User Manual

1. Install the front & back wheels on the
chassis, match the gear with the notch
on the chassis as shown.
2. Mount the motor on the chassis as
shown, make sure the motor is secured
between the two bumps, and the gears
are lined up with one another.
3. Install the two arms on the back cover. 4. Install the finished component (step3)
on the chassis as shown.
5. Install the neck for the head on the
back cover.
6. Place the head atop the neck. When a
click is heard the head will be securely
placed on to swivel up and down.
7. Install the connection bar on the back
cover as shown. A click must be heard to
ensure that it is fastened.
8. Install the support case on the
connection bar as shown.
3. Take the robot outdoors, and place it
on a smooth and flat surface in an open
area. For best results, place the robot
under direct sunlight. Please note that
the robot is faster under brighter sunlight
conditions.
2. Put on the solar panel cover frame as
shown. A click should be heard to ensure
that it is locked in place and the solar
panel is prevented from moving. (Do not
squeeze the wires.)
back wheels (with gear)
front wheels
chassis
motor
back cover
arm
neck
head
connection bar
support case
solar panel
solar panel cover frame
1pc
1pc
1pc
1pc
1pc
2pc
1pc
1pc
1pc
1pc
1pc
1pc
copper plate (yellow)
battery case
activated carbon
spoon
absorbent paper
magnesium plate (silver color)
chemical reaction box
wire plates
measuring cup
dropper
zipper bag (for activated
carbon)
2pc
2pc
1pc
1pc
4pc
4pc
1pc
1pc
1pc
1pc
1pc
Warning:
1. CHOKING HAZARD - The product contains small pieces. Keep it away from children under 3.
2. For your safety, do not put any parts of this product in contact with AC power.
3. To avoid accidents, do not put your finger or hair into the product.
This product is recommended for children over 8 years of age, parents should read the manual
carefully and guide their kids while they playing this product.
WARNING: CHOKING HAZARD Small parts.
Not for children under 3 years old.
User Manual
This product runs on green energy
that does not cause harm to the
environment. Use either solar
energy or salt water battery to power
the robot car. Guide your kids while
they assemble the robot car with
their own hands. Give the gift that
fosters curiosity and encourages
scientific learning.
Parts List
Assembly Instructions
Solar Panel Installation & Use
Good Job! We
are almost there!
AA
A
A
C
C
C
C
D
D
D
D
E
E
E
E
F
F
F
F
F
F
G
G
H
H
I
I
I
I
G
G
H
H
J
J
J
J
B
B
B
B
K
K
L
L
K
K
L
L
N
N
O
O
Q
Q
R
R
S
S
T
T
M
M
A
A
AA
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
O
O
P
P
Q
Q
R
R
S
S
T
T
U
U
V
V
W
W
CC DD EE FF GG
H
H
I
I
J
J
B
B
K
K
L
L
N
N
O
O
P
P
Q
Q
R
R
S
S TT
U
U
M
M VV
W
W
Tips:
1. Please read the instructions on the manual carefully before assembling.
2. Please identify the parts before assembling.
3. Parental guidance is recommended.
4. This product contains small parts, do not allow kids to put them in mouth.
5. Do not use the product if any part of this product has been damaged or
deformed.
6. Do not place the motor in water as it may damage the product or cause injury.
7. The robot car only runs on one type of energy (salt water battery or solar
power) at a time.
8. Do not pull or fold the wires as it may damage the wires.
9. The battery box may expand even after use due to the continuous chemical
reaction inside. To prevent this please follow the instructions on how to
properly disassemble and clean the battery box.
10. Please keep this manual for future reference.
1. Remove the thin plastic solar panel film before installing and wipe off any smudges
after finished. Place the solar panel atop the support case, and place the two solar
panel wires into the two designated slots. After connecting the solar panel wire with the
motor wire as shown. (Note: match the color of wires, red to red/black to black-do not
plug forcibly. Please ask for parents’ help if you have trouble plugging in the
connectors.)
GEO
Salt Water / Solar
Powered Robot
GEO
Salt Water / Solar
Powered Robot
Solar Powered
Salt Water Powered