User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
LED Indicator
Status
Description
Off
The LAN port is not connected, or not connected properly.
WAN
Solid on
The WAN port is connected properly.
Blinking
The WAN port is transmitting or receiving data.
Off
The WAN port is not connected, or not connected properly.
The LED indicator is reserved.
Port & Button
Port & Button
Description
WAN
It’s used to connect to an Ethernet cable with internet connectivity.
1/2/3
It’s used to connect to a wired device, such as a computer and so on.
WiFi
Press it to enable/disable WiFi feature.
RST
Hold it down for 8 seconds until all LEDs light up for once to restore to factory settings.
PWR
It’s used to connect to the included power adapter for power supply.
WAN
1/2/3
WiFi
RST
PWR