User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
Duplex. Change the setting only when it is necessary.
14.3 LAN Parameters
This function enables you to set the LAN IP address, preferred DNS server, alternative DNS server and DHCP
server of the router.
To change LAN parameters, choose Administration > LAN Parameters to enter the page.
Modifying the LAN IP Address
If you use multiple routers or other network devices (such as switches and APs) at the same time, IP address
conflicts may occur. If the router is involved in an IP address conflict, change the LAN IP address of the router.
Configuration Procedure
Step 1 Choose Administration > LAN Parameters to enter the page.
Step 2 Set LAN IP Address to an IP address that is not in use, such as 192.168.5.1.
Step 3 Click OK to apply the settings.