User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
Step 2 WiFi Name: Set WiFi Name to Tenda_XXXXXX.
Step 3 WiFi Password: Set WiFi Password to 12345678.
Step 4 Click OK to apply the settings.
--End
After the configuration, wireless clients, such as smart phones, can connect to Tenda_XXXXXX for internet access.
6.3 WiFi Signal Strength
In this part, you can change WiFi signal strength.
Parameters
Parameters
Description
Low
The wireless transmitting power is low. This mode is applicable to the environment of barrier
free and with small area.
High
The wireless transmitting power is high. This mode is applicable to the environment of multi
obstacle and with large area.
Changing WiFi Signal Strength
Step 1 Choose Wireless Settings to enter the page.
Step 2 Set Strength to Low.
Step 3 Click OK to apply the settings.
--End