User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
--End
Wait for a moment. When the Connection Status displays “Connected. You can access the internet.”, the router is
connected to the internet successfully.
5.4 WISP Mode
In WISP mode, the router can extend a WiFi signal of ISP for internet access. Also, it can extend WiFi signals
nearby.
WISP Mode Configuration
Step 1 Choose Internet settings.
Step 2 Select WISP.
Step 3 Select the WiFi name you want to extend.
Step 4 Enter the WiFi password of the wireless network in the Password of the upstream WiFi network box,
which is 12345678 in this example.
Step 5 Click Connect.