User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
Parameters
Description
DHCP: The ISP does not provide any parameters for internet access.
Static IP address: The ISP provides a static IP address and other related
parameters for internet access.
PPPoE user name and
password
Enter the PPPoE user name and password provided by your ISP.
IP address, subnet mask,
default gateway,
preferred/alternate DNS
server address
Enter the IP address, subnet mask, default gateway, and DNS server addresses
provided by your ISP.
Click this icon to the WiFi signals nearby.
Select
Select the WiFi name you want to extend.
WiFi Name
It specifies the name of wireless network.
MAC Address
It specifies the MAC address corresponding to a wireless network.
Channel
It specifies the wireless channel at which the wireless network works.
Security Mode
It specifies the security mode of the wireless network.
Strength
It specifies the WiFi signal strength of the wireless network.
5.1 PPPoE
Configuration Procedure
Step 1 Choose Internet Settings.
Step 2 Connection Type: Select PPPoE.
Step 3 User Name: Enter the user name provided by your ISP.
Step 4 Password: Enter the password provided by your ISP.
Step 5 Click OK to apply the settings.
--End