User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
Step 2 Start a web browser on the computer, enter tendawifi.com or 192.168.0.1 in the address bar, and
press Enter.
Step 3 The router detects the connection type automatically. Enter the required information based on the
onscreen instruction. Take PPPoE an example.
1. Connection Type: Select PPPoE.
2. User Name: Enter the PPPoE user name provided by your ISP.
3. Password: Enter the PPPoE password provided by your ISP.
Step 4 Customize a WiFi name and WiFi password.
Step 5 Click OK to apply the settings.