www.tenda.cn Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned here in are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without prior expressed written permission from Shenzhen Tenda Technology Co.
www.tenda.cn Table of Contents 1. Product overview.......................................................................................................................... 5 1.1.Package list ........................................................................................................................... 5 1.2.Computer requirement .......................................................................................................... 5 1.3.Introduction ..........................................
www.tenda.cn 4.7.1. User management ................................................................................................... 28 4.7.2. Time settings ........................................................................................................... 28 4.7.3. Reboot IP camera .................................................................................................... 28 4.7.4. Restore factory default .................................................................................
www.tenda.cn 1. Product overview 1.1.Package list Please check carefully if all listed items are included in the package as below: 1、One IP-Camera; 2、One CD; 3、One Quick Installation Guide; 4、Mounting bracket set; 5、One RJ45 Cable; 6、One Power adapter; Note: Please do connect the power adapter to an electrical outlet that matches the adapter's rated input voltage, otherwise it will damage the device. If any item mentioned above is missing or damaged, contact the place of purchase immediately. 1.2.
www.tenda.cn smartphone scan the QR code of the device, automatic P2P registration, then you can view immediately, life is just that simple. plug and view. 4.Remote Viewing：Use P2P “CloudNeteye”APP, you can remote view through the iPhone, Android smartphone. 5.H.264 Video Compression：H.264 video compression technology, the same picture quality, need the minimum bandwidth network traffic, more suitable for smartphone viewing. 6.
www.tenda.
www.tenda.cn C3 2. Installation 2.1.Hardware installation 2.1.1.Table install 2.1.1.1.Cube IP Camera ① ② ③ Figure1.Take out the bracket ,turn the screw on the camera base counter-clock wise to loosen it. Figure2.Camera connect to camera base, turn the collar on the camera base clockwise to tighten it. Figure3.Moving the camera to the position you want, tighten the screw by turning it clock wise. 2.1.1.2.PTZ IP Camera ④ Figure4.
www.tenda.cn Figure5.Attach antenna to the antenna connector on the back of the camera, and fix it. 2.1.2.Wall install According to your needs, refer to the figure to install。 2.1.2.1. Cube IP Camera ① ② Figure 1:Take out the bracket,then fix the bracket to the wall using screws. Figure 2:Turn the screw on the bracket counter-clock wise to loosen it. ③ ④ Figure 3:Camera connect to bracket, turn the collar on the bracket clockwise to tighten it.
www.tenda.cn ① ② ③ Figure1.Connect an Ethernet cable to the LAN port on your router. Note: If your Router connected to a MODEM.The camera is unable to connect to the port of the MODEM. Figure2.Connect the other end of the Ethernet cable to the network interface of the camera. Figure3.Connect the power adapter to the power receptacle of the camera, the other end of the power adapter to a nearby power strip. （Make sure power adapter is plugged properly into device power receptacle.
www.tenda.cn 3. Setup Wizard Step 1: Insert the included CD into your computer's CD drive, enter CD driver and then click " " to run the Setup Wizard utility. This wizard will guide you connect Tenda super easy IP camera series to your network. Step 2: Select the language you need and click " " in the appearing page. Step 3: Follow instructions on the setup wizard screen below to complete installation of hardware on desktop and then click " ".
www.tenda.cn Step 4: Follow instructions on the setup wizard screen below to connect hardware (Make sure power adapter is plugged properly into device power receptacle. Some users may mistakenly plug the power connector to device's audio interface) and then click " ". Step 5: Follow instructions on the setup wizard screen below to check power and network connections. If everything is OK, click " ".
www.tenda.cn Step 6: Setup wizard will automatically complete Active-X detection and install (If your firewall asks whether to block the Active-X during installation, select allow installation to ensure successfully installation.) Step 7: Follow instructions on the setup wizard screen below to complete basic configurations for the camera and then click " ".
www.tenda.cn 3 2 4 1 1．Click " 5 ".（If your firewall asks whether to block the utility, select don't block or directly disable firewall before you start searching.) Note: If it‟s fail to search the camera , please enter the CD driver: \FAQ\FAQ-en, refer to Question 1 for detail. 2. Choose a camera in “Device list” list box. 3.Set IP address of the camera You can choose one of way to change the IP address of the camera. Method One:Set IP address of the camera automatical,you need to check " ".
www.tenda.cn videos or do system settings . 4. HD series Web Configuration（For C50/C5） " ，enter You can follow the setup wizard, in the last step of the wizard, Click" “admin” in both user name and password text boxes on the appearing login window, and then click “OK” to enter the Web UI. If you have not changed your camera‟s default IP address, simply launch a web browser, input http://192.168.0.188 and then press “Enter” key . Enter “admin” in both user name and password text boxes.
www.tenda.cn directory is D:\Record and D:\Snap ); 5. Talk button : Click this button to hear what the person at the side of computer talks. Click it again, it will stop playing; 6. Audio monitor button : Click this button to hear what people talking about at the side of IP Cameras, 2) Select language and bit-rate You can change language between Chinese and English.
www.tenda.cn 4.2. Running status You can check some information of the device, example of software version, web version, Mac address, TF/SD card status. Also can operate the functions for “Get Wan IP Address”,“View the Contents of the TF/SD card”, “Format the TF/SD card”, “Stop the TF/SD card”. TF/SD status bar shows the free capacity if TF/SD card is inserted. Tips： ① The device supports max 32G TF/SD card. Please format the TF/SD card to FAT32 before use the card on camera.
www.tenda.cn 4.3. Video setting 4.3.1. Video parameter Note: When you modify the parameters, you need to click Apply to save your settings.
www.tenda.cn 4.3.2. Audio parameter The camera supports G.711 and G.726 audio encoding format. The sound of the G.711 is better, but it occupies more bandwidth. If you click “On” of the audio capture, so it will transmit audio in corresponding video stream. Please open the audio here, should you hear the sound when clicking audio play button in 4.1.1. Note: 1. If you want to do two-way audio by smartphone, the Audio Type need to set to G. 726. 2.
www.tenda.cn 4.4. Network setting 4.4.1. LAN settings You can choose one of the way to change the IP address of the camera. Method One: Set IP address of the camera automatically by select "Dynamic IP Address "in" IP Configuration Type" item. Note,this need your Router‟s DHCP Server function on. Method Two:Set IP address of the camera manually by select "Fixed IP Address "in" IP Configuration Type" item.
www.tenda.cn Select „On‟ and click „Search‟, and then select wireless Router in pop up menu, click „OK‟ and enter its password, click „apply‟ to save the wireless settings. And you can click „check‟ to check if the wireless setting is successful. After setting successfully, please pull out network cable, then you can use the wireless function. 4.4.3. Remote Access setting User can also use third party DDNS, such as www.dynddns.
www.tenda.cn 4.4.4. ONVIF settings The camera supports ONVIF protocol, so it can be interconnected with NVR that support ONVIF. Supported ONVIF version: 2.0.1 Note: When you modify the parameters, you need to click Apply to save your settings. 4.5. Alarm setting 4.5.1. Motion Detection Setting You can check any window form "Window1" to "Window4" to monitor it. When the exception occurs in the windows , it will trigger alarm.
www.tenda.cn The area for motion detection area, if the alarm set success, when change the region will trigger the alarm Move the cursor to here, when the arrows into a two-way arrow, press the mouse left key drag can zoom in on the rectangular frame size Please click “apply” after the settings are done, and motion detection takes effect. The higher value, the higher sensitivity. The camera will trigger corresponding alarm when any change occurs in the detection area. 4.5.2.
www.tenda.cn you want to set it. About Email Setting, you can enter CD Driver: \ FAQ\FAQ-en, please refer to the FAQ-en question 4 for detai. Note: When you modify the parameters, you need to click Apply to save your settings. 4.5.4. Scheduled time setting Select the time you want to alarm. The default value is all time. If you want to alarm on certain time, you can select it on the time table.
www.tenda.cn If you check “Save Images to the TF/SD card”, the snap pictures will be stored into SD card during the setting time. If you check ”Save Images To an FTP Server” ,the snap pictures will be stored into FTP server during the setting time. As shown above, it sets auto capture from Mon 8:30 to 9:30, you only need to click the corresponding time block to set them, the time block will become green when you selected. Note: When you modify the parameters, you need to click Apply to save your settings.
www.tenda.cn then you can click “Test” to check if the setting is successful. The SMTP server name: It is mailbox server, for example of SOHU mailbox, it is “smtp.sohu.com”. Please fill all blanks which we filled above. Otherwise, the settings will fail. Please click “Test” to test if the E-mail setting is successful. Note:If it‟s failure when you point “ ”,You can enter CD Driver:\FAQ\FAQ-en, please refer to question 4 for detail. 4.6.4.
www.tenda.cn 2) FTP storage space and the authority 3) Create sub-category to store the video or pictures. Note: The password should not be special character, otherwise the camera can‟t identify it. 4.6.5. PTZ Protocol setting PTZ Protocol Setting, set the cruise laps, PTZ speed, self-inspection location, Close alarm when PTZ movement. When you click Apply after setting the corresponding data will be saved.
www.tenda.cn 4.7. System setting 4.7.1. User management There are 3 levels of user authorization in it. Administrator: “admin” has the highest authority. It can do any settings. The factory default password: admin. Note: It is recommended you set the administrator account user name is “admin”. Set your own password. If the administrator account user name is not “admin”, the user can not use PTZ function of the PTZ camera in centralized control software IPCamMonitor.
www.tenda.cn 4.7.4. Restore factory default Restore factory default 4.7.5. Backup/Restore settings If you click “Confirm” of Backup setting data, the camera will create a file, you can store it to your computer, and you can directly call this file to restore the settings. The function helps to manage the cameras and no need to do all the settings again. 4.7.6. Upgrade The firmware upgrade is for updating system firmware and web UI. 4.7.7. System Log 5.
www.tenda.cn 5.1. View video 1 2 1) Operation interface Language selection: support Simplified Chinese and English Resolution selection button：VGA/QVGA/QQVGA（640*480/320*240/160*120） PTZ control button：up/down/left/right/center Vertical Patrol/Horizontal Patrol/Set preset/Call preset/Listen/Talk/Snapshot/Record 2) System settings Click “System settings” button to enter system setting web page, you can configure your camera. 5.2.
www.tenda.cn 5.3. Video setting 5.3.1. Video parameters setting OSD/IR LED control/flip/mirror 5.4. Network setting 5.4.1. LAN setting If you want to change ip address of the camera, except for changing it in setup wizard, also you can change it in “LAN setting” of network setting.
www.tenda.cn 5.4.2. WiFi setting Enter the Wireless LAN Setting, click the “Scan” button, it will show you all the wireless networks detected in the Wireless Network list column. Select one of them and tick “Using Wireless LAN”, then the relevant data of the selected wireless network will be shown in the following blanks. Input the password and click “Submit”, then the WIFI setting is finished. Unplug the cable, then you can connect to router by WiFi.
www.tenda.cn 5.5. Alarm setting 5.5.1. Alarm setting If user needs to monitor a fixed area, it will detect the motion and trigger the alarm when there is any motion in the area. In the motion detect sensibility, the smaller the value, the more sensitivity. After triggering the alarm, you can adopt several alarm mode in armed time.
www.tenda.cn 5.6.3. E-mail setting When it detects alarming, it can send email to your appointed email box, but you need to set email service parameters correctly. As shown below, click “Submit” to save these parameters, and then you can click “Test” to check if the setting is successful. 5.6.4. FTP setting The device will snap live pictures and send them to FTP server when alarming, but need to set the FTP setting correctly.
www.tenda.cn 5.7. System settings 5.7.1. User setting 5.7.2. Device date and time settings You can enable “Sync with NTP Server” when the device was connected to WAN, but need to select correct time zone where the camera is located, otherwise need to select“ Sync with PC time”. 5.7.3. PTZ settings It will stop cruise automatically after cruising an hour when you select cruise turns as “always”. 5.7.4.
www.tenda.cn 5.7.7. Upgrade system firmware There are two kinds of firmware run in the camera, one is system firmware, another one is Web UI, you can upgrade them respectively.
