Quick Installation Guide AC1200 Dual Band Gigabit WiFi Router AC8 Package Contents - Wireless Router x 1 - Power Adapter x 1 - Ethernet Cable x 1 - Quick Installation Guide x 1 Please read this guide before you start with the quick setup upon the first use. This guide instructs how to install and connect the device. For more information, such as the description of symbols displayed on relevant materials, please visit www.tendacn.com or scan the Product Documents QR code of this guide.
Step 1: Import Your PPPoE User Name and Password into the New Router (Optional) Tips This function is only applicable when the connection type of the original router is PPPoE. Power source ➊ IPTV/3 WPS/RST WPS/RST IPTV/3 2 2 1 1 WAN POWER Power source New router WAN ➋ Original router Ethernet cable ➊ Power on the original router and new router. ➋ Connect the WAN port of the original router to a LAN port of the new router using an Ethernet cable.
Step 2: Connect the Router to the Internet ➊ Power source Internet WAN WPS/RST WiFi-enabled device MAC Settings Pin No. 2 1 WAN POWER IPTV/3, 2, 1 SSID: Tenda_XXXXXX Serial No.
Step 3: Set up the Router ➊ Launch a web browser on a smartphone or computer connected to the router, visit tendawifi.com to enter the web UI, and then click Start (computer used as an example). tendawifi.com Welcome Quick Setup Wizard Start Tips If the web UI does not appear, refer to Q1 in FAQ. ➋ The router detects your internet connection type automatically (PPPoE is used for illustration here).
➌ Set WiFi name, WiFi password and login password of the router, and then click Next. WiFi Settings Tenda_XXXXXX WiFi password of 8-32 characters Not Required Set the WiFi password as the login password of the admin account. Login password of 5-32 characters Not Required Next Tips - WiFi password: Used to connect to the WiFi network. - Login password: Used to log in to the web UI of the router. Done.
LED Indicators/Buttons/Ports/Jack Tips Desktop mounting: The device must be horizontally mounted for safe use. Wall-mounting: - Recommended specifications of the plastic screws and anchors: Screw: PA3*14 mm; head diameter: 5.2 mm; Anchor: outer diameter: 6.6 mm; inner diameter: 2.4 mm; length: 26.4 mm. - The equipment is only suitable for mounting at heights ≤ 2m.
WPS/RST WPS/RST IPTV/3 2 IPTV/3 Button/ port/jack 2 1 1 WAN POWER Description Used to start the WPS negotiation process, or to reset the router. - WPS: Press the button of the router for 1 to 3 seconds. Within 2 minutes, enable the WPS function of the other WPS-supported WPS/RST device to establish a WPS connection. - Reset: When the router is working normally, hold the button down for about 8 seconds, and then release it when the LED indicators blinks fast. The router is reset.
FAQ Q1: I cannot log in to the web UI of the router by visiting tendawifi.com. What should I do? A1: Try the following solutions: - If you are using a WiFi-enabled device, such as a smartphone: • Ensure that it connects to the WiFi network of the router. • Ensure that the cellular network (mobile data) of the smartphone is disabled. - If you are using a wired device, such as a computer: • Ensure that tendawifi.com or 192.168.0.
Q4: Why cannot I find the WiFi signal of the router? A4: Connect your computer to port 1, 2 or IPTV/3 of the router to log in to the web UI. Navigate to WiFi Settings and try the following methods: - Ensure that the wireless function is enabled. - Ensure that the Hide function is disabled. - Ensure that your WiFi name does not contain any Chinese characters. Q5: I cannot find the 5 GHz WiFi network of the router on my WiFi-enabled device.
CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Operations in the 5.15-5.25GHz band are restricted to indoor use only. This equipment should be installed and operated with a minimum distance 20cm between the device and your body. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Caution: Adapter Model: BN073-A12012E, BN073-A12012B, BN073-A12012U Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD. Input: 100-240V AC 50/60Hz 0.4A Output: 12V DC, 1A : DC Voltage Safety Precautions Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents. The warning and danger items in other documents do not cover all the safety precautions that must be followed.
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Technical Support Shenzhen Tenda Technology Co., Ltd. Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 USA hotline: 1-800-570-5892 Toll Free: 7 x 24 hours Canada hotline: 1-888-998-8966 Toll Free: Mon - Fri 9 am - 6 pm PST Hong Kong hotline: 00852-81931998 United Kingdom hotline: +44 0800 041 8955 Global hotline: +86 755-2765 7180 (China Time Zone) Website: www.tendacn.com E-mail: support@tenda.com.cn support.de@tenda.cn (Deutsch) support.fr@tenda.
