User manual

A5 150Mbps Travel Wireless N Router User Manual
55
¾ Enable: Check or uncheck to enable or disable the remote
web-based management feature.
¾ Port: Enter a port number for remote web-based
management.
¾ IP Address: Enter the IP address of a PC on Internet
authorized to access and manage your router’s web-based
utility remotely.
For example: If you want to allow a PC at the IP address of
218.88.93.33 to access your router’s web-based utility from
Internet via port: 8080, you need to configure same settings
shown in the diagram above on your router. And what this IP user
needs to do is to simply launch a browser and enter http:
//220.135.211.56:8080 (provided that your router’s WAN IP
address is 220.135.211.56).
Note:
If you enter 0.0.0.0 in the IP address box, then all PCs on
Internet can access your router’s Web-based utility to view or
change your settings remotely once you enable the remote
Web-based management feature.
3.6 Routing Settings
3.6.1 Routing Table
This page displays the router’s core routing table which lists
destination IP address, subnet mask, gateway, hop count and
interface.