User manual

A5 150Mbps Travel Wireless N Router User Manual
49
3.5.1 Client Filter
To better manage the computers in LAN, you can regulate
LAN computers’ access to some ports on Internet through using
Client Filter functionality.
¾ Filter Mode: Select Disable, Forbid only or Permit only
according to your own needs.
¾ Access Policy: Select a number (indicating a filter rule) from
the drop-down menu.
¾ Remark: Enter a meaningful name to you for a new filter rule.
¾ Start /End IP Address: Enter a starting/ending IP address.
¾ Port: Enter TCP/UDP protocol port; it can be a port range.
¾ Type: Select a protocol or protocols for the traffic
(TCP/UDP/Both).
¾ Time: Select a time range for the rule to take effect.
¾ Day: Select a day or several days for the rule to take effect.
¾ Enable: Check to enable or uncheck to disable a
corresponding filter rule （allow/disallow matched packets to