User manual

A5 150Mbps Travel Wireless N Router User Manual

you are not sure about which protocol to use.

¾ Enable: Check the “Enable” option to activate the

corresponding rule next to it.

¾ Delete: Check the “Delete” option to delete the

corresponding rule next to it.

¾ Well-Known Service Ports: The “Well-Known Service Port”

provides commonly used protocol ports. Select one from

them and then click the “Add to” button to automatically add

selected port to the Start Port-End Port fields of the

corresponding rule ID. You can also manually add the ports

which are not included in the “Well-Known Service Port”.

¾ Add to: Add a selected Well-Known Service Port to the Start

Port-End Port boxes of the rule you select.

For example:

You want to share some large files with your friends who are

not in your LAN; however it is not convenient to transfer such large

files. Then, you can set up your own PC as a FTP server and use

the port range forwarding feature to let your friends access these

files. Provided that the static IP address of the FTP server (Namely,

your PC) is 192.168.2.10 and you want your friends to access this

FTP server through default port 21 and TCP protocol, then you

can follow the steps below for configurations.

1. Enter 21 for both the start and end port in ID 1, or select "FTP"

from “Well-Known Service Port” and port 21 will be added

automatically to ID 1.

2. Enter 192.168.2.10 for the "IP Address", select "TCP" and then

select "Enable'.