User manual

A5 150Mbps Travel Wireless N Router User Manual

MAC Address: Displays the MAC addresses of the PCs that have

been wirelessly connected to your router.

Bandwidth: Displays the channel channel bandwidth used by the

currently connected hosts (connected wireless clients).

Note:"Bandwidth" refers to the wireless channel bandwidth

instead of wireless connection rate.

3.3 DHCP

3.3.1 DHCP

The Dynamic Host Configuration Protocol (DHCP) is an

automatic configuration protocol used on IP networks. If you

enable the built-in DHCP server on A5, it will automatically

configure the parameters of TCP/IP protocol for all your LAN

computers (including IP address, subnet mask, gateway and DNS

etc), eliminating the need for manual intervention. Be sure to set

your computers to be DHCP clients by setting their TCP/IP

settings to “Obtain an IP Address Automatically”. When you turn

your computers on, they will automatically load the proper TCP/IP

settings provided by the A5.