User manual

A5 150Mbps Travel Wireless N Router User Manual
27
PPTP
¾ Mode: Displays the current Internet connection type.
¾ PPTP server address: Enter the IP address of a PPTP
server.
¾ Username/Password: Enter Username/Password specified
by the PPTP server.
¾ MTU: Maximum Transmission Unit. DO NOT change it from
the factory default of 1492 unless necessary. You may need
to change it for optimal performance with some specific
websites or application software that cannot be opened or
enabled; in this case, try 1450, 1400, etc.
¾ Address mode: Select “Dynamic” if you don’t get any IP
information from the PPTP server, otherwise select “Static”.
¾ IP address: Enter the IP address information provided by
your ISP (PPTP server). Inquire your local ISP if you are not
clear (Static IP address mode only).
¾ Subnet mask: Enter the subnet mask provided by your ISP,
normally, 255.255.255.0 (Static IP address mode only).
¾ Gateway: Enter the gateway provided by your ISP (Static IP