User's Manual

418 Users manual Release 1.00 – NOVEMBER, 2011
Part #74468
Printed in USA 11
5. Fault
5.1. Fault conditions
When a fault condition occurs the 418 will go
into bypass mode and display the word
FAULT and what the problem was on the
display. To recover from a fault condition,
correct the problem and cycle the power
switch on the 418.
5.2. List of faults
DISPLAY Condition
FAULT Ic >30 amps
FAULT TEMP > 85 degree C
FAULT OVERDRIVE >10 watt in
FAULT OVERDRIVE PWR >115 watts out
FAULT SWR HIGH >3.5:1 swr
FAULT RFD Rf detected not the
same as band
selected.