User Manual

.07.
INSTRUCTION MANUAL
● When the surrounding temperature is 25
ºC
and MB-36G has no load, it
will take around 30 minutes to decrease the pantry ’s temperature from
25
ºC
to 17
ºC
.
When the surrounding temperature is 25
ºC
and the wine cooler MB-36B
has no load, it will take around 30 minutes to increase the wine cooler’s
temperature from 25
ºC
to 12
ºC
● MB-36G is recommended to be designed at 17
ºC
. The energy
consumption is 90kWh/year. If the setting temperature is higher than 17
ºC
,
the energy consumption will be lower. If the setting temperature is lower
than 17
ºC
, the energy consumption will be higher.
● MB-36B is recommended to be designed at 12
ºC
.The energy consumption
is 125kWh/year. If the setting temperature is higher than 12
ºC
, the energy
consumption will be lower. If the setting temperature is lower than 12
ºC
, the
energy consumption will be higher.
● MB-36G will be auto-defrost for 20 minutes in every 24 hours. While MB-
36B will be auto-defrost for 60 minutes in every 36 hours
● The refrigerator should be located in the coolest area of the room, away
from heat producing appliances, and out of the direct sunlight.
● Overloading the refrigerator forces the thermoelectric cooling system to
run longer.
● Reduce door openings and extended searches, remove as many item
as needed at one time, and close the door as soon as possible.
● One characteristic of heat-pipe units is the length of time it requires
to recover from having the door opened and shut frequently. It may be
necessary to wait longer for the temperature to return to its former level
once the door has been opened for too long. This is normal for the type of
unit.
● Heat-pipe technology costs just pennies to operate. It is environmentally
friendly due to the lack of CFC's.
版本号
审 查
日 期
A3
A
B
C
D
E
F
A
B
C
D
E
1 2
3
4
5
6
7
8 9
1 2
3
4
5
6 7
8 9
版本号
审 查
日 期
A3
A
B
C
D
E
F
A
B
C
D
E
1 2
3
4
5
6
7
8 9
1 2
3
4
5
6 7
8 9
MB-36G
MB-36B